Toyota + Other Radio Master Codes!!

Moderators: Administrator, Executive Members, Moderator Group

Toyota + Other Radio Master Codes!!

Postby Br3nnan » Thu Jul 22, 2010 11:19 pm

Thought I would share my find. I needed the master code on my new 2 as the battery had died and I did not have the owners code. The code goes by the small numbers on the din. Mine was 56802 which isn't even listed but I tried the closest one which was din code = 56807, master code = 878410.

So for anyone with a stock stereo with the "SEC" or "HELP" enabled hope these help they took me forever to find, I even called Toyota and they gave me the wrong one! The ones in bold are most likely the ones people on this forum would be interested in.


Address Code Decoding Method
Class
Type
Decoding method
BMW
CM5901

Find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 3, code will be 25123;To short group 2,3,4 , 6, code will be 16326; To short group 2,3 ,6, code will be 26266; To short group 1,2,3,4 , 5, code will be 23543; To short group 2,3,4 , 5, code will be 33111.
(Notice: when we say to short the group(s), means the other group(s) open. Find 0.047V/5.5V battery on the circuit board, open and discharge it then power audio and enter code)
 
BMW
CM5903

Find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 1 , 4, code will be 52324;To short group 3,4,5 , 6, code will be 15532; To short group 1,3,4 , 5, code will be 34252; To short group 1,2,3 , 6, code will be 11111; All groups open, code will be 62463.
(Notice: when we say to short the group(s), means the other group(s) open. Find 0.047V/5.5V battery on the circuit board, open and discharge it then power audio and enter code)
 
BMW
CM5905

Find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 2,4,5 , 6, code will be 45244; To short group 1,2 ,4, code will be 12422.
(Notice: when we say to short the group(s), means the other group(s) open. Find 0.047V/5.5V battery on the circuit board, open and discharge it then power audio and enter code)
 
BMW
CM5907

Find jumpers of 7 groups, Group 1, 2,3,4,5,6 , 7, on the circuit board. To short all groups, code will be 12434.
(Notice: when we say to short the group(s), means the other group(s) open. Find 0.047V/5.5V battery on the circuit board, open and discharge it then power audio and enter code)
 
BMW
CM5908

Find jumpers of 6 groups, Group TD0,1, 2,3,4,5, on the circuit board. To short group 1,3 , 5, code will be 51333; To short group 0,1,2 ,5, code will be 46334; To short group 0,2,3, code will be 35332.
(Notice: when we say to short the group(s), means the other group(s) open. Find 0.047V/5.5V battery on the circuit board, open and discharge it then power audio and enter code)
 
BENZ
CM2129

Find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 1,2,3,6, code will be 3642.
(Notice: when we say to short the group(s), means the other group(s) open.)
 
VOLVO
CR608

Take socket out and find out LED contacts of group1, 2,3,4,5,6,7,8,9,10,11,12 on the circuit board; To short group 3,4,6,9,10, code will be 4434; All contacts shorted, and code will be 1111.
 
VOLVO
CR905

Take socket out and find out LED contacts of group1, 2,3,4,5,6,7,8,9,10,11,12 on the circuit board;To short group 1,2,3,5,6,8,10, code will be 4434; all groupsopen, and code will be 6666.
 
VOLVO
CR906

Take socket out and find out LED contacts of group1, 2,3,4,5,6,7,8,9,10,11,12 on the circuit board;To short group 3,5,7,9,11,12, code will be 3226.
 
HONDA-LEGEND
2100

Take socket out and find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 1 2,3,5, code will be 63334;To short group 1,6, code will be 77783.
(Notice: when we say to short the group(s), means the other group(s) open.)
 
HONDA-LEGEND
2200

Take socket out and find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 3, code will be 71821;To short group 2,4,5,6, code will be 27287.
(Notice: when we say to short the group(s), means the other group(s) open.)
 
HONDA-LEGEND
CM6913

Take socket out and find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 4code will be 71821;To short group 1,6, code will be 77783.
(Notice: when we say to short the group(s), means the other group(s) open.)
 
HONDA-CIVIC
2503

Take socket out and find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 6, code will be 63323;To short group 1 2,3,4,5, code will be 24133;To short group 1,6, code will be 21114.
(Notice: when we say to short the group(s), means the other group(s) open.)
 
HONDA-CIVIC
2505

Take socket out and find jumpers of 6 groups, Group 1, 2,3,4,5,6, on the circuit board. To short group 6, code will be 63323;To short group 1 2,3,4,5, code will be 24133;To short group 1,6, code will be 21114.
(Notice: when we say to short the group(s), means the other group(s) open.)
 

 
Address Code Decoding Data
Class
Type
Decoding method
HONDA-LEGEND
MF928A0

Take CD socket out and find jumpers from CODE1 to CODE6on the circuit board. To short CODE6,code will be 63323;To short group CODE1 to CODE5, code will be 24133;To short CODE1 and CODE6, code will be 21114.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
HONDA
2300

Decoding method for the model without CD function.
Take socket out and find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 1,5,6, code will be 51334; To short group 1 2,3, code will be 22115;To short group 2,3,4,5,6, code will be 43435.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
HONDA
2300

Decoding method for the model with CD function.
Take socket out and find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 6, code will be 63323;To short group 1 2,3,4,5, code will be 24133;To short group 1,6, code will be 21114.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
HONDA
2500

Find jumpers ofgroup TD1 to 6 and ANTI on the circuit board.
Open the jumper ANTI will do.
 
HONDA
2000

Find jumpers of group TD1 to 6 and A on the circuit board.
Open the jumper A will do.
 
HONDA
3000

Find jumpers of group TD1 to 6on the circuit board.
All contacts shorted, code will be11226.
 
HONDA
4002

Find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 3,4, code will be 15251.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
HONDA
4006

Find jumpers of 6 groups, Group C1 to C6,on the circuit board.
All contacts shorted, code will be 11226.
 
COUGAF
9100W

Find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 2,3,5,6, code will be 5234.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
COUGAF
9200W

Find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 3,5, code will be 1652.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
DAEWOO
CM3919

Take socket out and find jumpers of 6 groups, Group TD1, 2,3,4,5,6, on the circuit board. To short group 3, code will be 71821;To short group 2,4,5, 6 code will be 27287.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
PEUGEOT
PU9357

Take socket out and find double-row jumpers of 14 on the circuit board. To short group 3,5,11,12, code will be 4554.
(Notice: when we say to short the groups, means the other groups open. Open and discharge the big blue capacitance by CPU, and then power on. Code should be entered one time, otherwise, the panel will have no response.)
 
HYUNDAI
H857

Take socket and CD socket out and find LED contacts of 10 groups, CA1 to CA10, on the circuit board. To short group 2,3,4,6,8, code will be 1561.
(Notice: when we say to short the group(s), means the other group(s) open. )
 
HYUNDAI
H817

Take socket and CD socket out and find LED contacts of 10 groups on the circuit board. To remove the LED at D616 can operate with no code.
 


Decoding Instruction
Class
Type
Instruction
HONDA
1106
Take socket out, find LC46 or 93C46 on the circuit board and tear it down can operate with no code.
HONDA
1108
To find D607 and add LED at it or to remove audion at D736 can operate with no code.
HONDA
1109
To find D607 and add LED at it or to remove audion at D736 can operate with no code.
HONDA
1110
Take socket and CD socket out and remove 93C46 on the circuit board can operate with no code.
HONDA
1111
Take socket and CD socket out and remove 93C46 on the circuit board can operate with no code.
HONDA
1102
Take socket out and add LED at D605 on the circuit board can operate with no code.
HONDA
1107
Take socket out and add LED at D606 on the circuit board can operate with no code.
HONDA
1XKO
To remove 93C46 can operate with no code.
HONDA
1XK3
To remove 93C46 can operate with no code.
HONDA
1XX0
To remove 93C46 can operate with no code.
HONDA
1XC1
To remove 93C46 can operate with no code.
HONDA
1XP0
To remove 93C46 can operate with no code.
HONDA
1XP1
To remove 93C46 can operate with no code.
HONDA
1XA1
Take CD socket out and remove 93C46 on the circuit board can operate with no code.
BENZ
MF2197
Take CD socket out and remove 24C02 on the circuit board and enter with code 11111.
BENZ
MF2297
Take CD socket out and remove 24C02 on the circuit board and enter with code 11111.
BENZ
CM2294
To remove the socket and S24S4, and then cut the pin1 on the left of 9pins CB401 between panel and circuit board, can operate with on code.
BENZ
CM2694
To remove the socket and S24S4, and then cut the pin1 on the left of 9pins CB401 between panel and circuit board, can operate with on code.
Mitsubishi
P501
To remove the socket can operate without code by adding LED at D601 or removing 63C46 to open the instrument with code 0000.
Note: 0.047U 5.5V battery on circuit board should be opened and discharged before opening the instrument with code.
Mitsubishi
P502
To remove the socket can operate without code by adding LED at D601 or removing 63C46 to open the instrument with code 0000.
Note: 0.047U 5.5V battery on circuit board should be opened and discharged before opening the instrument with code.
Mitsubishi
P503
To remove the socket can operate without code by adding LED at D601 or removing 63C46 to open the instrument with code 0000.
Note: 0.047U 5.5V battery on circuit board should be opened and discharged before opening the instrument with code.
Mitsubishi
P508
Take out socket and CD socket on the circuit board.
Mitsubishi
P601
To remove the socket can operate without code by adding LED at D601 or removing 63C46 to open the instrument with code 0000.
Note: 0.047U 5.5V battery on circuit board should be opened and discharged before opening the instrument with code.
Mitsubishi
P602
To remove the socket can operate without code by adding LED at D601 or removing 63C46 to open the instrument with code 0000.
Note: 0.047U 5.5V battery on circuit board should be opened and discharged before opening the instrument with code.
Mitsubishi
P704
Take CD socket out, and then remove 93C46 on the circuit board to enter with code 0000.
Open and discharge 0.047V/5.5V battery on the circuit board before entering.
Mitsubishi
P801
Take CD socket out, and then remove 93C46 on the circuit board to enter with code 0000.
Open and discharge 0.047V/5.5V battery on the circuit board before entering.
Mitsubishi
P805
Take CD socket out, and then remove 93C46 on the circuit board to enter with code 0000.
Open and discharge 0.047V/5.5V battery on the circuit board before entering.
Mitsubishi
P903
Take CD socket out, and then remove 93C46 on the circuit board to enter with code 0000.
Open and discharge 0.047V/5.5V battery on the circuit board before entering.

 
TOYOTA Audio Decoding Processing
Class
Type
Code
Instruction
TOYOTA
17801
108431
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button "1" depressed, and input the first 3digit code 108 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button "1" depressed, "----" redisplays, input the last 3digit code 431 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

16803
108431
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button "1" depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 108 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 431 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

16804
108431
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 108 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 431 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

33110
108431
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 108 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 431 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11708
607410
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 607 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 410 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11706
906743
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 906 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 743 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11701
906743
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 108 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 431 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.


TOYOTA Audio Decoding Processing
Class
Type
Code
Instruction
TOYOTA
2634
906743
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 906 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 743 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

51703
054787
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 054 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 787 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

168056804
878410
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 878 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 410 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11712
640702
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 640 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 702 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

51706
328448
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 328 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 448 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11601
512810
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 512 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 810 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

11609
512810
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 512 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 810 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.


TOYOTA Audio Decoding Processing
Class
Type
Code
Instruction
TOYOTA
P1602
596239
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 596 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 239 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1604
596239
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 596 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 239 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1609
241239
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 241 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 239 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

N204
334989
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 334 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 989 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1601
810284
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P6801
841960
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 841 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 960 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1700
841960
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 841 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 960 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.


TOYOTA Audio Decoding Processing
Class
Type
Code
Instruction
TOYOTA
P6802
891440
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 891 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 440 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1701
891440
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 891 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 440 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

1N404
588410
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 588 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 410 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

AD6800
266614
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 266 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 614 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

AD1700
120167
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 120 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 167 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

56807
524608
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 524 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 608 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

16806
752722
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 752 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 722 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

 
TOYOTA Audio Decoding Processing
Class
Type
Code
Instruction
TOYOTA
P622
810284

The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P623
810284
The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P624
810284
The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P625
810284
The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P626
810284
The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

N004
810284
The audio has been locked up when "SEC" or nothing displayed. In such condition, it can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state ("HELP" means no display).
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 5 times until nothing displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button "TUNE" with button 1 depressed, and input the first 3digit code 810 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 284 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.

P1608
596239
The audio has been locked up when displaying "SEC" or "HELP". In such condition, it only can benormally used after decoding. Decoding steps as follows, When displaying "SEC", change it to "HELP" state.
1, Press top of button "TUNE" with button 1 depressed, "----" will be displayed, now input any 3digit code and press button "SCAN" 3 seconds, "ERR" will be displayed. Repeat 10 times until "HELP" displayed.
2, Press button 1,4,6 & the switch button at one time, "SEC" redisplays. Press top of button TUNE with button 1 depressed, and input the first 3digit code 596 when "----" displayed. After inputting first 3digit code, Press bottom of button "TUNE" with button 1 depressed, "----" redisplays, input the last 3digit code 239 and press "SCAN" for 3 seconds until "OK" displayed. Now can be normally operated on reset.


TOYOTA Audio Decoding Information
TOYOTA-CAMRY
108431 Suitable for 17801.16803.16804.33110
607410 Suitable for A11708.11709
906743 Suitable for 11706.11701.2634
054787 Suitable for 51703
878410 Suitable for 56804
640702 Suitable for 11712
328448 Suitable for 51706
TOYOTA-LEXUS-LS400
512810 Suitable for 11601.11609
810284 Suitable for 1601.626.624.N004
596239 Suitable for 1604.1602
241239 Suitable for 1609
334989 Suitable for N204
TOYOTA-LEXUS-E300
841960 Suitable for P6801.P1700
TOYOTA-LEXUS-GS300
891440 Suitable for P6802.P1701
588410 Suitable for N404
TOYOTA-LEXUS-250
283689 Suitable for P622
TOYOTA-AVALON
266614 Suitable for AD6800
120167 Suitable for AD1700
524608 Suitable for 56807
752722 Suitable for 16807

 
 
Audio Decoding Instruction
Number
Name/Type
Jumper and code
Note
1
BMW-CM5901
Short 2 code 56553
Short 1,2 code 33412
Short 2,3,4,6 code 16326
2
BMW-CM5903
Short 3 code 25123
Short 4,5,6 code 62552
Short 1,2,4,5 code 56611
3
BMW-CM5905
Short 2,4,5,6 code 45244
Short 1,2,4 code 12422
4
BMW-CM5907
Short 1,2,3,4,5,6,7 code 12434
5
BMW-CM5908
Short 1,3,5 code 51333
Short 0,1,2,5 code 46334
Short 0,2,3 code 35332
6
BENZ-CM2191
Short 1,2,3,6 code 3642
7
VOLVO-CR608
12 LEDS all Shorted code 1111
Short 3,4,6,9,10 code 4434
8
VOLVO-CR905
12 LEDS all open code 6666
Short 1,2,3,5,6,8,10 code 4434
9
VOLVO-CR906
Short 3,5,7,9,11,12 code 3226
10
HONDA-1106
To remove LC46 or LR46 on the circuit board
11
HONDA-1102
Add LED at D606 on the circuit board
12
HONDA-1111
Add LED at D614 by CPU on the circuit board can operate with no code
13
HONDA-1110
To remove 93C46 on the circuit board
14
HONDA-1108
Add LED at D607 on the circuit board
15
HONDA-1109
Add LED at D606 on the circuit board
16
HONDA-2100
Short 1,2,3,5 code 63334; all Null code 15884
17
HONDA-2200
Short 3 code 71812
Short 1,6 code 77783
Short 2,4,5,6 code 27287
18
HONDA-2300
Short 1,6 code 21114
Short 1,2,3,4,5 code 24133
with CD function
19
HONDA-2300
Short 1,5,6 code 51334
Short 1,2,3 code 22115
Short 3,4,5,6 code 43435
without CD function

20
HONDA-2503
Short 6 code 63323
Short 1,2,3,4,5 code 24133
 
21
HONDA-2000
Disconnect address code A on the circuit board
22
HONDA-2500
Disconnect address code ANTI on the circuit board
23
HONDA-3000
Short 1,2,3,4,5,6 code 11226
24
HONDA-4002
Short 3,4 code 15251
25
HONDA-1XAO
Remove LR46A on the circuit board
26
HONDA-1XA3
Remove LR46A or 93C46 on the circuit board
27
COUGAF-9100W
Short 2,3,5,6 code 5234
28
COUGAF-9200W
Short 3,5 code 1652
29
PEUGEOT
Short 3,5,11,12 code 4554
30
DAEWOO-3919Y
Short 1,6 code 77783
 
31
MITSUBISHI-E049
Add LED at D851,D852,D853
32
MITSUBISHI-P601
Add LED at D602 by CPU on the circuit board
33
MITSUBISHI-P503
Add LED at D601 by CPU on the circuit board
34
MITSUBISHI-P501
Add LED at D601 by CPU on the circuit board
35
MITSUBISHI-P508
Add LED at D602
36
HYUNDAI
D627,D614 null ,other Short LED, code 3316
Br3nnan
Baby '2
 
Posts: 50
Joined: Sat Mar 27, 2010 9:15 pm
Status: Offline

Re: Toyota + Other Radio Master Codes!!

Postby sbarc » Fri Jul 23, 2010 8:56 am

This is interesting.....alhtough I must confess I don't understand this. I do have the stock radio for my '91, so I am interested in making use of this info......if in fact I do have issues when I install my stock stereo unit back into my car.

Of all the radios listed....how do I know which instructions apply to my MR2? I have my stereo unit sitting beside me on my desk but I couldn't get any of the numbers on my stereo unit to match up with the list above.

Or is this info not needed for the 2nd Gen MR2's?
'93 MR2 N/A
'91 MR2 N/A
'89 MR2 SC (CDN car)
'89 MR2 SC (US car)
'85 Supra (white)
'85 Supra (silver/Grey 2 tone)
'90 Porsche 928 GT
'81 Porsche 924 Turbo
'73 Triumph GT6
71 Opel GT
User avatar
sbarc
Baby '2
 
Posts: 187
Joined: Thu May 13, 2010 5:46 am
Location: Victoria
Status: Offline

Re: Toyota + Other Radio Master Codes!!

Postby Br3nnan » Fri Jul 23, 2010 10:24 am

It is only needed if you have the little security key on your stereo, the one that normally blinks red. To my knowledge not all MR2's came with the security enabled stereo so you may have one which is not. If you need to find a number use CTRL + F cause the list is a little long and confusing. The procedure is quite simple though.

If the numbers don't match up try the closest one there, like I said mine was 56802 but the code closest was for 56807 and it worked. If not you can call Toyota and they will try to give it to you but they gave me the wrong code.
Br3nnan
Baby '2
 
Posts: 50
Joined: Sat Mar 27, 2010 9:15 pm
Status: Offline


Return to Audio, Alarm, and Stereo Talk

Who is online

Users browsing this forum: No registered users and 1 guest

cron