Rebuilding a 3S.

Moderators: Administrator, Executive Members, Moderator Group

Re: Rebuilding a 3S.

Postby PearlWhiteMR2 » Tue Jun 05, 2012 8:35 am

I replaced the brushes and diode assembly in my alternator as they were shot. Tested them out first and sure enough one diode was dead. Well I should say TRYING to replace, have yet to find a diode assembly that's a perfect fit.

Image

Also cleaned up my engine bay, tucked the wires for the oil pressure and temperature gauges away from the coolant lines as best as I could, mounted the boost controller to the flange on the afm, routed the boost lines, and mounted and installed the catch can and lines. Bay looks much cleaner now!

Before:

Image
Image

After:

Image
Image

Sent from my MB860 using Tapatalk 2
-Sarah
1985 MR2 - R.I.P
1991 MR2 Turbo
2013 Scion FR-S
Apprentice Tech at Valley Toyota
User avatar
PearlWhiteMR2
Grandfather '2
 
Posts: 1775
Joined: Mon Dec 22, 2008 12:11 pm
Location: Mission, BC, Canada
Status: Offline

Re: Rebuilding a 3S.

Postby macatak » Tue Jun 05, 2012 10:07 am

KO uses flat bar stock welded to the exhaust and a single bolt through the stock rubber
bushings on the body side to mount their exhausts. They also add a flange (V band clamp would work as well) right after the flex pipe before the cross member
to make the removal, installation and alignment a lot easier than the oem system.
you can see them in the pic's on KO's site.
'89 SC, 1st place MR2 MK1/MK3, 2013 Toyotafest; Best AW11 PSTOF 2010
'91 Turbo,
'99 Maxima ES - lump
User avatar
macatak
Papa '2
 
Posts: 1204
Joined: Thu Aug 07, 2003 8:03 am
Location: Wobbly Grove, B.C.
Status: Offline

Re: Rebuilding a 3S.

Postby bbarnumboy » Wed Jun 06, 2012 11:41 am

whats the catch can for? Tube pointed down to the road :-D
God created turbo lag to give the v8's a brief moment of hope
User avatar
bbarnumboy
MR2 know it all
 
Posts: 3097
Joined: Sat May 06, 2006 12:08 pm
Location: Everett, WA
Status: Offline

Re: Rebuilding a 3S.

Postby PearlWhiteMR2 » Sun Jun 10, 2012 5:50 pm

Well, we managed to fab up a turbo stay and get the alternator back together with a brand new rectifier and brushes, and I've now put ***200*** kms on the engine already. It pulls hard, and runs smoothly. It's stock boost and plenty of accelerating/decelerating and heating up/cool down cycles to ensure all the rings and gaskets seat properly. After 1000 kms, it will be changed over to synthetic oil, coolant will be flushed (running water currently), and then I can turn the boost up a bit.

Tomorrow I'm taking it to work to put all the underbody panels back on and the front lip, and detail the poop out of it. I'm in the process of selling my 240, so once it sells, the MR2 will be my daily once again :)
-Sarah
1985 MR2 - R.I.P
1991 MR2 Turbo
2013 Scion FR-S
Apprentice Tech at Valley Toyota
User avatar
PearlWhiteMR2
Grandfather '2
 
Posts: 1775
Joined: Mon Dec 22, 2008 12:11 pm
Location: Mission, BC, Canada
Status: Offline

Re: Rebuilding a 3S.

Postby immorality » Sun Jun 10, 2012 6:20 pm

Awesome news Sarah! Glad to hear that we will be seeing her soon, congrats on all the hard work.
User avatar
immorality
BCMR2 Web Admin & Executive Board Member
 
Posts: 9730
Joined: Thu Oct 31, 2002 1:32 pm
Location: Burnaby
Status: Offline

Re: Rebuilding a 3S.

Postby Bravo 5 » Mon Jun 25, 2012 2:47 pm

I really don't think you're selling your car after all this work are you??

http://vancouver.en.craigslist.ca/rds/c ... 35396.html

It might actually be 3 different white MKII's all in one ad :?
1985 MR2, 1989 SC, 1991 n/a
Collector of MR2 memorabilia
User avatar
Bravo 5
Grandfather '2
 
Posts: 1603
Joined: Tue Feb 17, 2004 11:14 pm
Location: Vancouver, BC
Status: Offline

Re: Rebuilding a 3S.

Postby Goopi » Mon Jun 25, 2012 5:26 pm

Bravo 5 wrote:I really don't think you're selling your car after all this work are you??

http://vancouver.en.craigslist.ca/rds/c ... 35396.html

It might actually be 3 different white MKII's all in one ad :?

She has chrome rims on hers, unless she changed them, she also has a Toms rear bumper, etc.
User avatar
Goopi
Papa '2
 
Posts: 1015
Joined: Fri Nov 13, 2009 1:25 pm
Location: Surrey, B.C
Status: Offline

Re: Rebuilding a 3S.

Postby PearlWhiteMR2 » Mon Jun 25, 2012 5:44 pm

Dafuq??? That first picture IS my car, and the other two are someone else's...

Mine is not for sale and I'll be emailing that person to take my effing picture off their ad.
-Sarah
1985 MR2 - R.I.P
1991 MR2 Turbo
2013 Scion FR-S
Apprentice Tech at Valley Toyota
User avatar
PearlWhiteMR2
Grandfather '2
 
Posts: 1775
Joined: Mon Dec 22, 2008 12:11 pm
Location: Mission, BC, Canada
Status: Offline

Re: Rebuilding a 3S.

Postby bbarnumboy » Tue Jun 26, 2012 9:22 am

Whoever put that post up is an idiot. It is 3 different cars. One even has the 94 tails, and all 3 pictures have different wheels and lights etc. Lazy, go take your own pictures. Or it is a scam, I can't believe someone would do that, because it looks so fishy that they will hardly get any calls.

Sarah you should call him cause he posted his number
God created turbo lag to give the v8's a brief moment of hope
User avatar
bbarnumboy
MR2 know it all
 
Posts: 3097
Joined: Sat May 06, 2006 12:08 pm
Location: Everett, WA
Status: Offline

Re: Rebuilding a 3S.

Postby kakucaekz » Tue Jun 26, 2012 9:34 am

I remember an ad very similar to that, the green flake in the paint stood out. There were different pictures of it when I saw it a couple months ago, maybe the guy lost his pictures :lol: Still, I like how he's selling an NA and all the pics are Turbos (I assume).
Dalton
1991 MR2 Turbo - Summer toy
1992 Acura Integra GSR - Winter/daily/passenger car
User avatar
kakucaekz
Papa '2
 
Posts: 780
Joined: Fri Jun 03, 2011 10:12 pm
Location: East Vancouver
Status: Offline

Re: Rebuilding a 3S.

Postby PearlWhiteMR2 » Tue Jun 26, 2012 5:45 pm

I texted him and told him the first pic is my car and to take it down. I haven't seen any results yet, I flagged it but I can't say why I'm flagging it so nothing happens. Freaking idiot.
-Sarah
1985 MR2 - R.I.P
1991 MR2 Turbo
2013 Scion FR-S
Apprentice Tech at Valley Toyota
User avatar
PearlWhiteMR2
Grandfather '2
 
Posts: 1775
Joined: Mon Dec 22, 2008 12:11 pm
Location: Mission, BC, Canada
Status: Offline

Re: Rebuilding a 3S.

Postby bbarnumboy » Tue Jun 26, 2012 6:38 pm

Needs to be flagged by multiple IP addresses, so everyone flag it and it will go down.
God created turbo lag to give the v8's a brief moment of hope
User avatar
bbarnumboy
MR2 know it all
 
Posts: 3097
Joined: Sat May 06, 2006 12:08 pm
Location: Everett, WA
Status: Offline

Re: Rebuilding a 3S.

Postby Goopi » Tue Jun 26, 2012 7:49 pm

I flagged it.
User avatar
Goopi
Papa '2
 
Posts: 1015
Joined: Fri Nov 13, 2009 1:25 pm
Location: Surrey, B.C
Status: Offline

Re: Rebuilding a 3S.

Postby bbarnumboy » Wed Jun 27, 2012 6:07 am

Just flagged it again and it went down. good work guys.
God created turbo lag to give the v8's a brief moment of hope
User avatar
bbarnumboy
MR2 know it all
 
Posts: 3097
Joined: Sat May 06, 2006 12:08 pm
Location: Everett, WA
Status: Offline

Re: Rebuilding a 3S.

Postby PearlWhiteMR2 » Wed Jun 27, 2012 9:49 am

Thanks guys!

Sent from my MB860 using Tapatalk 2
-Sarah
1985 MR2 - R.I.P
1991 MR2 Turbo
2013 Scion FR-S
Apprentice Tech at Valley Toyota
User avatar
PearlWhiteMR2
Grandfather '2
 
Posts: 1775
Joined: Mon Dec 22, 2008 12:11 pm
Location: Mission, BC, Canada
Status: Offline

PreviousNext

Return to Do-it-yourself \ How-to

Who is online

Users browsing this forum: No registered users and 1 guest

cron