Well this hasn't been updated in a very long time. I'll keep this 'short' and include only our current MR2's.
Name(s): Thomas & Kristin Miles
Board ID: toyotaspeed90
(this photo shows it currently... I'm trying to get some work on the body done so some of the trim is off the car)
Year: 1986
Model: N/A sunroof
Color: Red
Mods:
Interior - Aftermarket 320mm steering wheel & hub, added rear speakers (stock 87+ location)
Exterior - Stock, removed spoiler, original 15" Enkei 92's
Engine - has a rod knock right now, pursuing other options. Was: JDM bigport shortblock, cut smallport head with bigport cams, rewired engine (cleaner wiring) and rewired main power cable (has fuse panel in trunk). This was it's 3rd engine in 3 months.... potential candidate for an MK1.22 swap
Suspension - Old style cheap coilover sleeves, new KYB GR2 inserts, max camber and max front caster
Other: 15/16" bore SW20 brake master cylinder
Year: 1987
Model: N/A Hardtop
Color: black'ish
Mods:
Interior: 300mm Grant steering wheel & hub, partially stripped interior, FG fixed back race seat, SFI certified latch style/3" 5pt harness (bolted to the chasis with 1/4" plate steel on each bolt, at least 4x4 if not larger on each)
Exterior: Some number plates/stickers, a stupid cover over the engine bay (I hate it and remove it when it's not raining). Race tires are dead so whatever wheels end up on it.
Engine: AE92 smallport 4agze longblock, all ae101 brackets & accessories, Megasquirt 1 V2.2/EDIS 4, 4/2/1 header, "custom" exhaust with an additional disc-only muffler on the end (removeable), AE92 C52 transmission, 10" fan for the IC (10" hole cut in engine lid for this, hence the stupid cover) with a 7x15" oil cooler directly attached to the fan, relocated battery to the frunk
Suspension: Newer style coilover sleeves (awaiting new strut housings to modify....) KYB GR2 inserts, max camber, max caster in the front
Other: 4 runner 1" bore brake master cylinder