Page 1 of 1

1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Wed Aug 19, 2015 10:58 am
by 7FigureSwagger
1992 turbo usdm donor car
like title says, have a donor car, let me know what you might need

Things gone
-drivetrain
-seats
-doors
-t-tops
-headlight brackets
-hood
-antenna
-radio bezel
-t-top shades

ask for what might still be here

I do have turbo hubs still available!

EDIT:
also have:
-ABS motor
-Brake booster, and Master cylinder
-the black trim everywhere except the rear passenger side.
-mirrors(yellow)
-1991 factory spoiler
-trunk lid(w/ good hinges)
-some front Frunk stuff still there
-rear suspension geometry including good rear balljoints
-all four struts w/ springs (still good but ripped bellows on the front)
-All Hardlines (including clutch)

-7

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Wed Aug 19, 2015 6:18 pm
by Oteck
pics of the frunk? is it abs or non? I'm looking to replace all the hardline in mine

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Wed Aug 19, 2015 9:06 pm
by 7FigureSwagger
This car has the cleanest, and most complete ABS, master cyl, and booster, with immaculate lines, save for one nut that one previous owner rounded a bit. Works great still if you have flare wrenches tho...
Everything is still factory AISIN hydraulics.
Let me know if you need anything else, but yeah I have all the hardlines, and clutch lines aswell.
-7

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Fri Aug 21, 2015 6:44 pm
by Oteck
doh, i was hopping for non abs as the pluming is different

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Sun Aug 23, 2015 2:29 pm
by 7FigureSwagger
Ahh sorry man, looks like most of this is only gonna get sold internationally anyways!
-7

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Sun Aug 23, 2015 8:48 pm
by ReDRuM
I believe I'll be needing the wiring harness that runs down the middle of the car...
Manj

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Tue Aug 25, 2015 9:42 am
by 7FigureSwagger
ReDRuM wrote:I believe I'll be needing the wiring harness that runs down the middle of the car...
Manj


In the process of pulling all that, depending on what I use I think I should have everything you need, including any modules along the way. I can send a pic of what I got when its out, should be finishing up that part tonight along with e-brake lines. PM me your email so I can send you the pictures.

-7

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Tue Aug 25, 2015 12:06 pm
by Variance
Do you have any of these available?
Black A-pillar (T-Top, Driver side)
Black Center Arm rest
HVAC Unit - Working Order
Passenger Window Switches
Driver's side Door Card

Re: 1992 USDM Donor Car Turbo hubs anyone?

PostPosted: Tue Aug 25, 2015 7:02 pm
by 7FigureSwagger
Variance wrote:Do you have any of these available?
Black A-pillar (T-Top, Driver side)
Black Center Arm rest
HVAC Unit - Working Order
Passenger Window Switches
Driver's side Door Card


I have a good pillar, and the full hvac, like I have the dash out and going thru the harness and modules. Let me know how much of it you need (may want the full thing as its MINT) aaaaaaaand pm me your offer or whate er well talk more there.
Thanks, 7