FS: TRD Bushings

[adam]

Brand New Installed in 1991 USDM Suspension. These bushings are for a '93, so the front couple don't fit.

Asking $old.

[kelowna-es1]

I have a Canadian 93 Turbo that I'm looking to update my suspension. Can you advise whether you still have the bushings and what components they fit.
Regards Mike

[adam]

Advised in the first post.

These bushings are for a '93, so the front couple don't fit.

Can you advise whether you still have the bushings and what components they fit.

[kelowna-es1]

Thank you for getting back to me, what I would like to clarify is if this a complete set of bushing for all the suspension components front and rear as I'm not familiar with what trd sold as a kit.

[camshaft]

good deal if they are installed

http://www.trdparts.jp/english/list_mr2.html

should come with 6 packages


Lower arm bush SW20 89.10-99.10 48654-SW252 F 2 Discontinued
Front strut bar cushion SW20 89.10-91.12 48674-SW251 F 4 Discontinued
SW20 91.12-99.10 48674-SW261 F 2 Discontinued
Rear strut rod bush SW20 All year 48715-SW251 F 2 Discontinued
Rear suspension arm bush No.1 SW20 All year 48725-SW251 F 2 Discontinued
Rear strut bar cushion SW20 All year 48787-SW251 F 4 Discontinued

Thank you for getting back to me, what I would like to clarify is if this a complete set of bushing for all the suspension components front and rear as I'm not familiar with what trd sold as a kit.

[adam]

There must have been a very early front suspension change before the '93 suspensions were revamped again, according to the production dates.

[camshaft]

Yes 93 has different front radius bushings. One single
91 has two per side

[adam]

Yes 93 has different front radius bushings. One single
91 has two per side

Yeah, I know the difference. Just surprised that the model changed in December 1991.

[camshaft]

Kelowna did that answer you question ?

Thank you for getting back to me, what I would like to clarify is if this a complete set of bushing for all the suspension components front and rear as I'm not familiar with what trd sold as a kit.

[kelowna-es1]

I think I'm up to speed on the bushings changes now, thank you to Camshaft for the clarification. Dj twin turbo, can you e-mail a list of what you have that will work on my car, as I'm interested.

[adam]

I think I'm up to speed on the bushings changes now, thank you to Camshaft for the clarification. Dj twin turbo, can you e-mail a list of what you have that will work on my car, as I'm interested.

I have the following parts from these pictures.

• #1 - USED - 12361-SW211
• #2 - USED - 12362-SW211
• #3 - USED - 12371-SW211
• #4 - USED - 12372-SW212

• #7 - NEW AND INSTALLED IN SUSPENSION PARTS - 48654-SW252
• #8 - NEW AND UNINSTALLED - 48674-SW261 (December 1991 Production Date and Newer - If you are unsure of your production date it says on the VIN label of your driver's side door if you have a Canadian car. If you have a Japanese car, I am not sure where the production date is.)
• #9 - NEW AND UNINSTALLED - 48715-SW251
• #10- NEW AND INSTALLED IN SUSPENSION PARTS - 48725-SW251
• #11 - NEW AND INSTALLED - 48787-SW251

[kelowna-es1]

My 93 Turbo is a Canadian model manufactured in May of 1992, so all the components should work. Can you send me an e-mail address so we can work out the details.
Regards Mike

[adam]

My 93 Turbo is a Canadian model manufactured in May of 1992, so all the components should work. Can you send me an e-mail address so we can work out the details.
Regards Mike

I sent you an email, Mike.
-Adam

[adam]

Sold.